C&I and Community Solar

Last updated: November 20, 2026

Screening C&I and community solar sites

Commercial and industrial (C&I) and community solar projects are usually ground-mount or large rooftop systems from a few hundred kilowatts to several megawatts. Early on, three questions decide whether a site is worth more work: is the solar resource strong enough, is the grid close, and is the land safe from flooding? Acrelume answers all three in one screen.

A typical workflow

  1. Collect candidate sites. Addresses from a landowner list, parcels from a broker, or coordinates from your own map.
  2. Screen each site in Site Studio. Search the address or paste coordinates; the solar, grid and flood checks load automatically.
  3. Read the verdict. Drop sites with possible deal-breakers, such as a location inside a FEMA high-risk flood zone or a line more than 15 km away.
  4. Save the promising sites and ask AI Portfolio Insights to rank them.
  5. Share a PDF report with partners or the landowner, then move the best sites to detailed design and a utility pre-application.

To screen a long list at once, connect an AI agent or use the API: it can screen up to 25 sites per request and rank them. See AI Agents and API.

What to look for

  • Solar resource: a daily GHI of 5 kWh/m² or more is strong; 4 to 5 can still work with good economics.
  • Grid distance: short connections keep costs down. Note the voltage of the nearest line as well as its distance.
  • Flood risk: a site inside a high-risk zone (A or V zones) needs a flood survey and may not be financeable.

What comes next

Acrelume narrows the list. Before committing to a site, confirm interconnection capacity with the utility, check zoning and land control, get a flood survey and run detailed energy modeling.

Was this page helpful?

Thanks for your feedback!